EasiSolv™ 110 Solvent Cleaner
Fast-acting solvent cleaner formulated to dissolve and remove printing inks from screen printing mesh, squeegees, flood bars, presses, pad printing tools, rotary screens, and more.
Description & Features
EasiSolv™ 110 Solvent Cleaner is a quick-drying cleaner formulated to effectively dissolve and remove printing inks from screen printing mesh, squeegees, flood bars, presses, pad printing tools, rotary screens, and more. The combination of components is designed to solubilize and remove virtually every type of ink and minimize any remaining stains in the printing mesh.
Features
- Low Flash Point
- Low Odor
- Quick Evaporation
- Good Adhesive Remover
- Non-Hazardous
Ink Compatibility
- Plastisol
- UV/Solvent
- Industrial
Directions for Use
** This product is meant to be used on your production floor and should not be rinsed clean with water.
- When you're done printing, scrape excess ink from the screen.
- Apply EasiSolv 110 by squirt bottle, pneumatic sprayer, or rag to the (well) ink side of the screen.
- Thoroughly agitate ink with a rag or scrubber, then wipe up all dissolved ink.
- Reapply if necessary and follow with a dry rag, wipe on both sides of the screen.
The screen will be ready for printing or tape application within 20 seconds.
Remove all ink and emulsion from the screen
Apply EasiSolv 701 stain remover to the (well) ink and print side of the screen and scrub
High-pressure rinse on both sides of the screen
Slowly flood rinse your screen to activate degreasing agent.
Technical Data Info
Appearance
Clear Yellow Liquid
Odor
Mild
PH
Neutral
Flash Point
48° C / 118° F
VOC
950 grams/liter
DOT Shipping
This product ships non-hazardous
Safety Precautions
If medical advice is needed, have product container or label at hand.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof ventilating equipment. Use only non-sparking tools. Take precautionary measures against static discharges. Avoid breathing mist, vapors. Wash hands, forearms and face thoroughly after handling. Wear protective gloves and eye protection. In the case of inadequate ventilation, wear respiratory protection.
If swallowed: rinse mouth. Do NOT induce vomiting.
If on skin: Wash with plenty of water.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy
to do. Continue rinsing.
If skin irritation or rash occurs: Get medical advice/attention.
In case of fire: Use foam, carbon dioxide (CO2), dry extinguishing powder, sand to extinguish.
Store in well-ventilated place. Keep cool. Store in closed container.
Dispose of contents/container in accordance with local/regional/federal regulations.
ChemTel USA, Canada, Puerto Rico & U.S.Virgin Islands: (800)-255-3924
MANUFACTURER +1(813) 248-0585
ChemTel International (Call Collect)
Easiway Systems Contract Number: MIS3609005
